Q77H2-M USER MANUAL
42
Chapter 3
This page sets secure boot mode.
Authentication Menu
System Boot State (User)
This item shows the system boot state.
Secure Boot Mode State (Enabled)
This item enables or disables the secure boot mode state.
Secure Boot (Enabled)
This item is used to control the secure boot flow, it is possible only if system runs
in User Mode.
Secure Boot Mode (Standard)
This item is used to select boot mode, when you select standard mode, secure
boot policy is fixed; when you select custom mode, the image execution policy and
secure boot key database are changeable.
Default Key Provisioning (Enabled)
This item enables or disables default key provisioning.
Version 2.15.1227.Copyright (C) 2002-2012, Inc.
Secure Boot flow control.
Secure Boot is possible only
if system runs in User Mode
System Boot State User
Secure Boot Mode State Enabled
Secure Boot [Enabled]
Secure Boot Mode [Standard]
Default Key Provisioning [Enabled]
BIOS Setup Utility
Main Advanced Power Authentication Security Boot Options Exit
F7: Load User default Settings
F9: Load Default Settings
+/-/Spacebar : Change Opt.
: Select Item
F8: Save as User Default
Settings
F10: Save & Exit Setup
ESC: Discard Changes and Exit
Setup
Enter : Select
: Select Screen
To Next Page
Loading...
Need help?
General
