35
Using BIOS
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Smart Fan Function
Help Item
SMART Fan Control Enabled
Smart Fan Function
f
Scroll to this item and press <Enter> to view the following screen:
Disabled
Enabled
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
SMART Fan start PWM value 28
SMART Fan start Offset (-) 32
CPU DeltaT +3
Fan1 Slope PWM value/1 Unit 4
Fan1 Full Speed Offset (-) 7
SMART Fan2 Control Enabled
SMART Fan2 start PWM value 23
SMART Fan2 start TEMP. (°C) 60
System DeltaT +3
Fan2 Slope PWM value/1 Unit 4
System FAN Full Limit Temp 86°C
Options
PC Health Status
This item lets you monitor the parameters for critical voltages, temperatures and fan
speeds.
-=- System Hardware Monitor-=-
Smart Fan Function Press Enter
System Temperature : 35°C/95°F
CPU Fan Speed : 1962 RPM
System Fan Speed : 0 RPM
CPU Vcore : 1.168 V
CPU VTT : 1.184
VDIMM : 1.456 V
NB Vcore : 1.120 V
SB VCC : 1.440 V
SB Vcore : 1.088 V
-=- PECI Mode -=-
Offset to TCC Activation Temp. : -48
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
PC Health Status
f
F10: Save ESC: Exit+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help
: Move
mnlk
SMART Fan/Fan2 Control (Enabled)
These items are used to enable or disable the CPU fan speed control function. If
enabled, the CPU fan runs at different speed according to the CPU temperature.
You can adjust the fan speed with EasyTune based on system requirements. If
disabled, CPU fan runs at full speed. (Default: Enabled)
SMART Fan/Fan2 Start PWM value (28/23)
These items are used to set the start PWM value of the CPU/SYS smart fan.
To Next Page
Loading...
Need help?
General
