Chapter 1
6
Z77H2-A3 USER MANUAL
I/O Ports
1. PS/2 Combo port
Use the PS/2 combo port to connect the PS/2 Keyboard or PS/2 Mouse.
2. USB 2.0 Ports
Use the USB 2.0 ports to connect USB 2.0 devices.
3. VGA Port
Connect your monitor to the VGA port.
4. DVI Port (colay HDMI Port)
You can connect the display device to the DVI port.
5. USB 3.0 Ports
Use the USB 3.0 ports to connect USB 3.0 devices.
6. LAN Port
Connect an RJ-45 jack to the LAN port to connect your computer to the Network.
7~12. Audio ports
Use the audio jacks to connect audio devices. No.10 port is for stereo line-in signal,
while No.12 port is for microphone in signal. This motherboard supports 8-channel
audio devices that correspond to No.7, No.8, No.9 and No.11 port respectively. In
addition, all of the 3 ports, No.8, No.9, and No.11 provide users with both right &
left channels individually. Users please refer to the following note for specific port
function definition.
LAN LED Status Description
OFF No data
Orange blinking Active
OFF No link
Green Link
Activity LED
Link LED
7: Center & Woofer 10: Line-in
8: Back Surround
11: Front Out
9: Side Surround
12: Mic_in Rear
The above port definition can be changed to audio input or audio output by
changing the driver utility setting.
To Next Page
Loading...
Need help?
General
