EDIFIER R2000DB User Manual

Connectivity
5
English
Illustrations
6
English
Remote control
Battery loading:
Please refer to the illustration to open the battery compartment,
insert the CR 2025 battery and close the compartment.
Note:
1. Do not place the remote control in places that are hot and humid.
2. Do not charge the batteries.
3. Remove the batteries when unused for long period of time.
4. The battery should not be exposed to excessive heat such as
Note:
①
Mute
②
ON/Standby
③
Volume decrease
④
Volume increase
⑤
Optical input
⑥
Bluetooth input
⑦
Line in1
⑧
Line in2
⑨
Classic Mode
⑩
Dynamic Mode
Only the standard PCM audio signals of sampling clock (44.1/48/96KHz) are adaptable in optical mode
1 2
3 4
5 6
7 8
9
10
OPT
Classic
Dynamic
LINE1 LINE2
Line In 1 Line In 2
OPT
Speaker In
L Speaker Out
BLUE
RED
GREEN
OPT
Line In 1/Line In 2
Input Indicator(LED)
Multimedia Speaker
R2000DB
Power
Off
On

EDIFIER R2000DB Specifications

General

Product color	Black
Housing material	Wood
Recommended usage	Speaker set unit
Remotely operated	Yes
Remote control type	IR
Suitable for outdoor use	No
Speaker type	2-way
Tweeter diameter	25 mm
Number of drivers	2
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Driver diaphragm material	Silk
Mid-range driver diameter	133 mm
Number of tweeter drivers	1
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	5.25 \
Amplifier class	D
Impedance	4 Ω
Frequency range	55 - 20000 Hz
RMS rated power	120 W
Signal-to-Noise Ratio (SNR)	85 dB
Total Harmonic Distortion (THD)	0.5 %
Equalizer	-
Channel separation	45 dB
Connector(s)	Optical / Coaxial
Connectivity technology	Wired & Wireless
Power source type	AC

Weight and Dimensions

Depth	289 mm
Width	174 mm
Height	252 mm
Weight	9720 g