EDIFIER R2000DB User Manual

7
English
Operational guide
8
English
EDIFIER R2000DB
① Turn on R2000DB speakers and switch to Bluetooth mode by pressing the Bluetooth button on the remote
or pushing the volume dial on the back panel of the active speaker until the indicator LED turns blue.
② Set your input device (mobile phone, tablet device, MP3/MP4 player etc.) to search for Bluetooth device and
select “EDIFIER R2000DB”.
③ Pair your device with “EDIFIER R2000DB”.
④ Play the audio on your device and adjust the volume to a desired level.
⑤ To disconnect Bluetooth: Press & hold
Total power output: RMS 24W × 2 (treble) + 36W × 2(bass) (DRC ON)
Signal to noise ratio:
≥
85 dBA
Frequency response: 50Hz ~ 20 KHz (+/-3db)
Input sensitivity: Line in1: 800 mV ± 50 mV
Line in2: 600 mV ± 50 mV
OPT: 500 mFFs ± 50 mFFs
Input type: RCA/Bluetooth/Optical
Bass driver: 5 inch (132 mm)
Treble driver:
Φ
25 mm silk dome tweeter
setup
Note:
software versions of source devices.
3. PIN code for connection is “0000” if needed.

EDIFIER R2000DB Specifications

General

Product color	Black
Housing material	Wood
Recommended usage	Speaker set unit
Remotely operated	Yes
Remote control type	IR
Suitable for outdoor use	No
Speaker type	2-way
Tweeter diameter	25 mm
Number of drivers	2
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Driver diaphragm material	Silk
Mid-range driver diameter	133 mm
Number of tweeter drivers	1
Tweeter diameter (imperial)	1 \
Mid-range driver diameter (imperial)	5.25 \
Amplifier class	D
Impedance	4 Ω
Frequency range	55 - 20000 Hz
RMS rated power	120 W
Signal-to-Noise Ratio (SNR)	85 dB
Total Harmonic Distortion (THD)	0.5 %
Equalizer	-
Channel separation	45 dB
Connector(s)	Optical / Coaxial
Connectivity technology	Wired & Wireless
Power source type	AC

Weight and Dimensions

Depth	289 mm
Width	174 mm
Height	252 mm
Weight	9720 g