EDIFIER S2000MK III User Manual

1. As the illustration shows, connect speakers using a speaker connecting cable.
2. Connect speakers to a power source using power cable and turn the power switch on, the speakers should be ready to go.
Line In Input
1. Connect audio source (mobile phone, tablet, etc.) to Line In 1/Line In 2 input ports (note color matching) on the rear panel of the active speaker using
audio cable.
2. Press the “LINE 1/2” button on the remote control, or press the “Volume dial/Input selection” dial on the rear panel of the active speaker, display
screen will show “LINE 1” or “LINE 2”.
3. Play music on the connected device and adjust the settings to the desired level.
Optical / Coaxial Input
1. Connect audio source (Blu-ray player, Set-Top Box, etc.) to OPT/COAX input port on the rear panel of the active speaker
using fiber optic audio cable or a coaxial audio cable (not included).
2. Press the “OPT” / “COAX” button on the remote control, or press the “Volume dial/Input selection” dial on the rear panel
of the active speaker, the display screen will show “OPTICAL” or “COAXIAL”.
3. Play music on the connected device and adjust the settings to the desired level.
Note:

EDIFIER S2000MK III Specifications

General

Brand	EDIFIER
Model	S2000MK III
Category	Speakers
Language	English