EDIFIER S880DB User Manual

13
English
Troubleshooting
Problem Solution
• Check if the power indicator light is ON
• Try to turn up the volume using either the master volume
control or remote control.
• Ensure the audio cables are firmly connected and the
input is set correctly on the speakers.
• Check if there is a signal output from the audio source.
• Make sure the speaker is switched to Bluetooth input. If
it is in other audio input modes, Bluetooth will not connect.
Disconnect from any Bluetooth device by pressing and
holding the volume dial in Bluetooth mode, then try again.
• Effective Bluetooth transmission range is 10 meters;
please ensure that operation is within the range.
• Try another Bluetooth device for connection.
• Check if main power is connected, or if the wall outlet is
switched on.
No sound
Cannot connect via Bluetooth
The S880DB does not turn on
To learn more about EDIFIER, please visit www.edifier.com
For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the
section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local
contact information.

EDIFIER S880DB Specifications

General

Product color	White, Wood
Volume control	Rotary
Bass adjustment	Yes
Housing material	Wood
Recommended usage	Universal
Remote control type	Wireless
Multi-Room Streaming (MRS) support	No
Speaker type	2-way
Woofer diameter	94 mm
Tweeter diameter	19 mm
Number of drivers	-
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Frequency range	55 - 20000 Hz
RMS rated power	88 W
Signal-to-Noise Ratio (SNR)	85 dB
Amplifier class	D
Amplifier/receiver input interface type	RCA
USB connector type	USB Type-B
Connectivity technology	Wired & Wireless
Package depth	270 mm
Package width	370 mm
Package height	320 mm
Package weight	8400 g
Power source type	AC

Weight and Dimensions

Depth	230 mm
Width	138 mm
Height	168 mm
Weight	7500 g