4. BRIEF INTRODUCTION
The EG4 12V & 24V-LL rack-mounted lithium batteries are ideal for low-voltage energy storage system
applications. These batteries use lithium iron phosphate cells with the highest safety performance and a
battery management system (BMS) that can monitor and collect voltage, current, and temperature of
each cell within the module in real time. The BMS also includes a passive balance function and an
advanced battery control strategy, which can help improve the battery pack's performance. The battery
includes dual, on board, fire-extinguishing modules for added safety.
5. INSTALLATION
5.1 PACKAGING LIST & PLACEMENT
When the product is unpacked, the contents should match those listed below:
5.2 LOCATION SELECTION AND INSTALLATION
5.2.1 STORAGE
There are a few steps you can take to ensure that batteries are stored safely and in a state that will
ensure they are not damaged during storage. These are detailed below.
Battery State
The state of the battery when placed into storage will affect how long it can be stored as well as the
battery’s condition when it is brought out of storage. EG4 recommends that each battery is brought to a
100% SOC (state of charge) before placing it in storage. Lithium iron phosphate batteries will lose a
certain percentage of their total charge while in storage, depending on how long they are stored and the
conditions they are stored in. We recommend recharging the batteries after 8 – 9 months in prolonged
storage.
Environmental Factors
The environment you store your EG4 battery in can greatly affect the health of the battery. For best
results, the temperature should remain moderate, between 41°F and 68°F (5°C and 20°C). Keep the
battery away from locations where it may get wet or locations with high humidity (>55%). Store the
batteries away from combustible materials.
To Next Page
Loading...
Need help?
General
