EINHELL GC-PM 40 S User Manual

GB
- 29 -
Ser vice information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Air fi lter, Bowden cables, grass basket, tires, drive
clutch
Consumables* Blades
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_GC_PM_40_S_SPK7.indb 29Anl_GC_PM_40_S_SPK7.indb 29 18.10.2018 14:05:4618.10.2018 14:05:46

EINHELL GC-PM 40 S Specifications

General

Type	Walk behind lawn mower
Drive type	Rear wheel drive
Motor type	Single cylinder OHV
Cooling type	Air
Cutting width	400 mm
Grass catcher	Yes
Product color	Black, Grey, Red
Cutting system	Rotary blades
Number of wheels	4 wheel(s)
Rotational speed	2900 RPM
Maximum lawn area	1000 m²
Mulching function	-
Fuel tank capacity	1 L
Handle(s) features	Ergonomic, Foldable
Engine displacement	99 cm³
Rear wheels diameter	203 mm
Front wheels diameter	178 mm
Maximum cutting height	60 mm
Minimum cutting height	25 mm
Grass collecting volume	45 L
Engine number of strokes	4
Number of height positions	7
Power source	Gasoline

Weight and Dimensions

Depth	710 mm
Width	533 mm
Height	415 mm
Weight	21400 g
Package weight	24400 g