GB
- 22 -
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Petrol lawn mower
•
Top and bottom push bar
•
Catch bag
•
1x cable clip
•
2x star nuts
•
2x long screws
•
Eyelet
•
2x Philips screws
•
Spark plug wrench
•
Petrol service manual
•
Original operating instructions
•
Safety instructions
3. Proper use
The equipment may only be used for the tasks it
is designed to handle. Any other use is deemed
to be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind caused as a result of this.
The petrol lawn mower is intended for private use
i.e. for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of
50 hours, during which time the machine is pri-
marily used to maintain small-scale, residential
lawns and home/hobby gardens. Public facilities,
sporting halls, and agricultural/forestry applica-
tions are excluded.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the lawn mower is properly used
and maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
Warning! Due to the high risk of bodily injury
to the user, the petrol lawn mower must not be
used to carry out the following work: Trim bushes,
hedges or shrubs, to cut scaling vegetation, plan-
ted roofs, or balcony-grown grass, to clean (suck
up) dirt and debris off walkways, or to chop up
tree or hedge clippings. Moreover, the lawn mo-
wer may not be used as a power cultivator to level
out high areas such as molehills.
For safety reasons, the lawn mower may not be
used as a drive unit for other work tools or toolkits
of any kind.
4. Technical data
Engine type ........One-cylinder four-stroke engine,
.....................................................................99 cc
Power input: ..............................................1.2 kw
Working speed n
0
: ................................ 2900 min
-1
Fuel: ...................................................Petrol (E10)
Tank capacity: ..................................... approx. 1 l
Engine oil: ......................................... approx. 0.4 l
Spark plug: ................................................F7RTC
Electrode gap (spark plug): .............. 0.5 - 0.7 mm
Cutting height
adjustment: .................... Central, (25-45-60 mm)
Cutting width: .......................................... 400 mm
Weight: ......................................................18,5 kg
Danger!
Sound and vibration
L
pA
sound pressure level ..................... 81,6 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level .......................... 96 dB(A)
K
WA
uncertainty ........................................2.45 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Vibration emission value a
h
= 2.658 m/s
2
K uncertainty = 1.5 m/s
2
Long work periods should be avoided due to the
development of high noise and vibration levels.
Anl_GC_PM_40_SPK9.indb 22Anl_GC_PM_40_SPK9.indb 22 18.10.2018 13:54:1418.10.2018 13:54:14
To Next Page
Loading...
Need help?
General
Weight and Dimensions
