GB
- 18 -
2.2 Items supplied
Please check that the article is complete as
speci ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Original operating instructions
3. Proper use
The device is designed for applications opera-
ted with a 230 V~ alternating current source. In
addition, if there is a USB connection, it can be
used for 5 V DC operation. Be sure to observe the
restrictions in the safety information. The gene-
rator is intended to provide electric power tools
and light sources with electricity. If other devices
are to be used, please also check their suitability
in accordance with the relevant manufacturer‘s
instructions, as the manufacturer may stipulate
additional restrictions relating to use with genera-
tors. In case of doubt, ask an authorized dealer of
the respective equipment.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Generator ................................................ Inverter
Protection type: ........................................ IP 23M
Continuous rated power P
rated
(S1): .......................
.....................................................1000 W/230 V~
Maximum power P
max
(S2 5 min): .1100 W/230 V~
Rated voltage U
rated
: .................................. 230 V~
Rated current I
rated
: ......................... 4.35A (230V~)
Frequency F
rated
: .......................................... 50 Hz
Drive engine design: ..............4-stroke, air-cooled
Displacement: ........................................... 79 cm³
Max. power: ..................................1.4 kW / 1.9 hp
Fuel: ....................... normal unleaded petrol (E10)
Tank capacity: ................................................6.5 l
Engine oil: .............................................. ca. 0.35 l
Consumption at 2/3 load: ............... approx. 1.2 l/h
Weight: ........................................................21 kg
Sound pressure level L
pA
: ................. 73.63 dB(A)
Sound power level L
WA
: K uncertainty ...................
............................................ 95 dB (A)/1.52 dB(A)
Power factor cos ϕ: ........................................... 1
Power class: ....................................................G3
Max. temperature: ....................................... 40°C
Max. altitude (above mean sea level): ..... 1000 m
Spark plug: ............................................LD E6TC
Operating mode S1 (continuous operation)
The machine can be continuously operated with
the quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated with
the quoted power output (5 min.). Afterwards the
machine must be stopped for a while to prevent it
from overheating (5 min.).
Anl_TC_IG_1100_SPK9.indb 18 06.08.2020 13:32:35
To Next Page
Loading...
Need help?
General
