Eizo FlexScan EV2316W User Manual

50
Chapter6Reference
6-3. Attaching/Detaching Cable Holder
A cable holder is supplied with this product. Use the holder to organize the cables connected to the monitor.
Attaching procedure
1.
Pass the cables through the cable holder.
2.
Close the opening in the cable holder.
3.
While holding the cable holder closed, attach it onto the stand.
Note
• The cable holder can be inserted either perpendicular or parallel to the stand. Change the direction of the cable holder
according to the conditions of the cables.

Eizo FlexScan EV2316W Specifications

General

Energy efficiency scale	A to G