Eizo FlexScan S2133 User Manual

35
Chapter6Reference
Chapter 6 Reference
6-1. Attaching the Optional Arm
An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site
for the corresponding optional arm (or optional stand). http://www.eizo.com
Attention
• When attaching an arm or stand, follow the instructions of their User’s Manual.
• When using another manufacturer’s arm or stand, conrm the following in advance and select one conforming to the VESA
standard.
- Clearance between the screw holes: 100 mm × 100 mm
- Thickness of plate: 2.6 mm
- Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.
• When using another manufacturer’s arm or stand, use the screws as described below.
- Screws xing the stand to the monitor
• When using an arm or stand, attach it to meet the following tilt angles of the monitor.
- Up 45˚, down 45˚ (horizontal display, and vertical display rotated 90 degrees clockwise)
• Connect the cables after attaching an arm or stand.
• Do not move the removed stand up and down. Doing so may result in injury or device damage.
• The monitor and arm or stand are heavy. Dropping them may result in injury or equipment damage.
• When setting the monitor to the portrait style, turn the monitor screen 90˚ in clockwise direction.
Procedure
1.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.
2.
Remove the stand.
Prepare a screwdriver. Loosen the screws (four) securing the unit and the stand with the screwdriver.
3.
Attach the arm or stand to the monitor.
Secure the monitor to the arm or stand using the screws specied in the User’s Manual of the arm or stand.

Eizo FlexScan S2133 Specifications

General

3D	Yes
HD type	UXGA
Pixel pitch	0.270 x 0.270 mm
Aspect ratio	4:3
Screen shape	Flat
Response time	20 ms
Display diagonal	21.3 \
Display resolution	1600 x 1200 pixels
Display technology	LED
Contrast ratio (typical)	1500:1
Display number of colors	16.78 million colors
Viewable size, horizontal	540 mm
Digital vertical frequency	49 - 76 Hz
Digital horizontal frequency	24 - 80 kHz
Display brightness (typical)	420 cd/m²
Supported graphics resolutions	720 x 400, 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Quantity	1
HDMI ports quantity	0
USB upstream port type	USB Type-B
USB Type-A downstream ports quantity	2
Pivot angle	0 - 90 °
Tilt angle range	- °
Number of OSD languages	6
Panel mounting interface	100 x 100 mm
On Screen Display (OSD) languages	DEU, ENG, ESP, FRE, ITA, SWE
Thin client installed	-
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Energy efficiency scale	A to G
Power consumption (max)	45 W
Power consumption (off)	0.1 W
Power consumption (standby)	0.3 W
Power consumption (typical)	17.4 W
Certification	CE, TÜV GS, TÜV, ISO 9241-307, TCO 6.0
Product color	Black
Cables included	DVI, USB
Sustainability certificates	ENERGY STAR
Harmonized System (HS) code	85285210

Weight and Dimensions

Depth (with stand)	209 mm
Height (with stand)	535 mm
Weight (with stand)	8600 g
Depth (without stand)	64 mm
Width (without stand)	465 mm
Height (without stand)	361 mm
Weight (without stand)	5600 g