Installation
8
487 22 52 21 - Cent. 240, 260, 290, GB
Installation of hydro-extractor:
With freely suspended basket
Unpacking
The hydro-extractor is protected against transport
damage and bolted to a pallet before delivery.
The transport protection consists of a wooden
plug fitted between the pallet and the
counterweight of the motor. Through the pallet
and the wooden plug, a bolt has been entered to
reach into the counterweight. When the hydro-
extractor is loosened from the pallet, the pallet
bolts are loosened through the service door of
the hydro-extractor and the transport protection
bolt must be loosened from the bottom of the
pallet.
Never lift the hydro-extractor drum!
With rigidly suspended basket
Unpacking
The hydro-extractor comes bolted to a transport
pallet and the bolts in the pallet must be
loosened through the service door of the hydro-
extractor.
Never lift the hydro-extractor drum!
Open the lid
All types
Drain hose is placed in the drum. The lid can be
opened as follows:
• Remove the cover of the control unit on the
rear of the hydro-extractor.
• Press the bar of the coil upwards.
1
1
1945
2
1948
2
Come with all types of hydro-extractor
Fitting template
Spacers
Base plates
Clamps for drain hose
* Nameplate for attachment to hydro-extractor
* Hydro-extractor log
*
Come with some models only.
To Next Page
Loading...
Need help?
General
