19
Setting Surface Controls
SETTING THE COOKTOP
) the needed element and
(or - see Figs. 2 through 5 -.
+ and -
see Fig 1
is still too hot to touch - see g. 6. If the
Med setting
Lo setting
indicator
set for low
set for medium
cautioN
Radiant surface elements may appear to have cooled after they have been turned OFF. The Hot Indicator
Light will turn ON and will continue to glow until the glass cooktop has cooled down to a moderate
level. The glass surface may still be hot and burns may occur if the glass surface is touched before
the indicator light has turned OFF.
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons
could catch re if placed too close to the surface elements.
To Next Page
Loading...
Need help?
General
