Problems and actions needed
24
Problems and actions needed
Never attempt any repairs or work on the cooker which could cause injury or damage the product. If you cannot
solve the problem after checking the list below, contact a service company approved by the supplier.
Problem Action needed
The cooker has no electrical supply
Check that:
•
THE
FUSE
(
S
) has not gone
•
THE
PLUG
is pushed in correctly
•
THE
RCD
(if fitted) has not tripped
The cooker will not work
Make sure the cooker function lock is not in use (see “The
cooker function lock” p. 13)
The rear left hotplate is not working
(230-volt cooker only).
The cooker has an electrical inter-lock so that the rear left
hotplate cannot heat while the oven Swift Start function is on.
This hotplate can be used as soon as the oven Swift Start heat-
ing is finished.
Boiling/frying takes a long time.
Check you have a suitable pan that conducts heat properly (see
“Choice of saucepan/frying pan” page 10)
The oven light is not working
Replace broken bulb (see “Changing oven light bulb”
page 18
The door safety catch isn’t working
Activate the door safety catch (see “The door safety catch” on
page 6)
To Next Page
Loading...
Need help?
General
