48 electrolux installation instructions
Installation Instructions
Attention: The new appliance may
only be installed and connected by a
registered expert.
Please comply with this. If you do
not, any damage resulting is not
covered by the warranty.
Safety information for the installer
• The electrical installation is to be set
up so that the appliance can be iso-
lated from the mains with a minimum
3mm all-pole contact separation.
Suitable separation devices include
e.g. cut-outs, fuses (screw fuses are
to be taken out of the holder), RCD’s
and contactors.
• Anti-shock protection must be pro-
vided by the installation.
• The built-in unit must meet the stabil-
ity requirements of DIN 68930.
• Built-in ovens and built-in cooking
surfaces are fitted with special con-
nection systems. For safety reasons,
they must only be combined with ap-
pliances from the same manufactur-
er.
To Next Page
Loading...
Need help?
General
