Electrolux EW 1010 F User Manual

Operating sequence
1. Place the laundry in the drum.
Open the loading door by
depressing the relevant
button. Place the gar-
ments to be washed
inside the drum one by
one laying them as flat as
possible. Close the door
ensuring that the catch
clicks into place.
2. Measure out the detergent into the
dispenser drawer.
Pull out the detergent dispenser drawer from the
control panel.
Pour the detergent into the main wash compartment.
Follow the detergent manufacturer’s guidelines for the
amount required.
If you wish to carry out a prewash, pour the amount of
detergent required into the «prewash» compartment.
3. Add the liquid additives if required.
Pour the softener, if re-
quired, into the compart-
ment marked (#J and the
bleach into the. compart-
ment marked 2.
Do not exceed the MAX
level.
4. Press the button(s) required and select
the spin speed.
5. Select the temperature
Turn the temperature
selector dial to the requi-
red value.
6. Selectthe required programme and start
the machine
Plug into the mains.
Turn on the water tap.
Check that the drain hose is correctly positioned.
a Turn the programme
“~~~ galector dial clockwise
until the programme
coincides with the
marker.
Press the ON/OFF but-
ton: the «mains on» light
will come on and the ma-
chine starts operating.
7. At the end of the programme
The appliance stops automatically.
Wait one or two minutes before opening the door
to give the electric locking mechanism time to release
it.
Depress the ON/OFF button again, the mains-on light
goes out.
Turn the water tap off and unplug the machine from
the mains.
Release the button(s).
Open the loading door and remove the laundry.
Ensure that the drum is completely empty by turning it
with one hand.
Leave the door ajar for a while to eliminate the steam.
25

Electrolux EW 1010 F Specifications

General

Brand	Electrolux
Model	EW 1010 F
Category	Washer
Language	English