7
Unpacking Washer
Removing foam packaging
1. Temporarily remove door tape.
2. Open washer door and remove everything from
the drum.
3. Close door and reapply door tape.
4. Using a rug, blanket or piece of cardboard to
protect the fl oor, carefully lay the washer on it’s
back.
5. Remove styrofoam base and shipping plug and
set them aside.
6. Carefully return the washer to an upright posi-
tion.
7. Carefully move the washer to within 4 feet (1 m)
of its fi nal location.
IMPORTANT
Save styrofoam base and shipping plug for use
to help prevent washer damage during any future
moves.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more than one
person move or lift the washer.
WARNING
SUFFOCATION HAZARD
Destroy the carton and plastic bags after the
washer is unpacked. Children might use them
for play. Cartons covered with rugs, bedspreads,
or plastic sheets can become airtight chambers
causing suffocation. Place all materials in a
garbage container or make materials inaccessible
to children.
To Next Page
Loading...
Need help?
General
