Operating Instructions
Cycle Settings
Washing Temperature
The appropriate washing temperature wi[I auto-
matically be indicated for the cycle selected.
For best results
Follow the fabric care label instructions
on items to be washed.
Tochange the temperature, press the Tempera-
ture button to scroll to the desired setting. Select a
wash water temperature according to fiber content,
colorfastness and soil level. A cold water rinse saves
energy and reduces wrinkling.
To protect your fabrics, not all temperatures are
available with every cycle. The indicator will not light
if the setting is not available with that cycle.
The temperature selected for the cycle will be
remembered and recalled each time that cycle is
selected in the future.
_@_ @
®
®
e
@
e
e
¢
®
To return to factory settings, \/
press these two buttons at the
same time and hold until the
signal sounds.
@
@
@
@
@
@
All wash water temperatures are automatically
regulated to maximize detergent effectiveness and
improve washing performance. The water heater
setting and its distance from the washer, water
usage in other parts of the home, and seasonally
low ground water temperature in some geographic
areas can affect water temperature.
SANITIZE
This setting sanitizes heavily soiled colorfast fabrics
such as towels, bedding, and children's clothing by
killing 99.9% of bacteria using wash water heated
with a boost heater to 152° F (67° C). Cold water is
used to cool and rinse the load. This setting is only
available with the deep clean sanitize cycle.
Temperature Spin Speed Soi|
_+ O sanitize r_ max C' extra heavy
@hot @ high @ heavy
(9 warm @ medium @ medium
O cold @ low @ light
(9 eco cold _ no spin @ extra light
HOT
Use this setting for heavily soiled white or colorfast
cottons and blends.
WARM
Use this setting for normally soiled white or colorfast
cottons or blends.
COLD
Use this setting for lightly soiled non-colorfast items,
knits, delicates, and hand washables.
ECO COLD
Wash and rinse temperatures are equivalent to tem-
perature of cold tap supply. Use this selection for
fabrics and colors that are prone to dye transfer. For
use with cold water @ detergents.
Spin Speed
Max, high, medium, and low spin speeds are
available for each cycle. The spin speed and/or
duration of final spin vary from cycle to cycle.
Increasing the spin speed will extract more water,
decrease drying time and conserve energy. De-
creasing the spin speed will reduce wrinkling.
Use no spin to omit the final spin at the end of the
cycle. The load will be very wet. Remove items from
the wash drum to drip dry or select the rinse & spin
cycle to remove excess water at a more convenient
time.
Soil Level
Adjust the wash time in 3-minute increments based
on the soil levelof each load. Extra heavy, heavy,
medium, light and extra light soil levels are avail-
able.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
