Care & Cleaning
Inside Routine Cleaning (Preventive)
To help prevent odors, mold or mildew, leave the
door open for a few hours after use or whenever
the washer is not in use.
o
o
_. CYCLE A
TO REFRESH OR CLEAN INSIDE OF WASHER
TOclean and freshen the washer, perform the
SYSTEM CLEAN cycle. For best results use the
SYSTEM CLEAN cycle once a month. To begin the
cycle, press select when prompted during auto-
mated reminder mode or manually select the cycle
by following these directions:
1. Wake up the washer by pressing any button, ro-
tate cycle knob to cycle "A" (indicated to right),
press the start button and then the cancel
button.
2. Wake up the washer again by pressing any
button, then immediately and simultaneously
press and hold both button "1" and button "2"
(indicated to right) for 5 seconds, or until the
LCD display changes.
BUTTON 1
÷
®
REMOVE "LIQUID
DISPENSER CUP
¢
¢
e
¢
@ BUTTON 2
If installed, remove the "MAIN WASH = LIQUID
ONLY" cup from the dispenser. REMOVE ALL
ITEMS FROM WASH DRUM before filling the "MAIN
WASH" detergent chamber with one (1) cup of liquid
chlorine bleach OR one (1) pouch of TIDE®WASH-
ING MACHINE CLEANER. DO NOT use both. Press
start to begin.
For best results
Immediately follow up with a spin only
cycle. Select fresh rinse on max spin
speed with no detergent or bleach to help clear
any residual bleach left after the SYSTEM
CLEAN cycle.
"MAIN WASH"
CO MPARTM ENT
To Next Page
Loading...
