Electrolux UltimateCare 700 User Manual

38 www.electrolux.com
38 www.electrolux.co.th
Malfunction Possible cause Solution
The “Time Dry” or the “Dryness
Level” degree has not been
selected.
Select the drying time or
the dryness level degree.
The water tap is not turned on.
(Error code: )
Open the water tap.
The drain filter is clogged.
(Error code: )
Clean the drain filter.
The machine is overloaded. Reduce the laundry load in
the drum.
The selected drying program,
time or dryness level was not
suitable for the laundry.
Select the suitable drying
program, time or dryness
level for the laundry.
Machine
does not dry
or does not
dry properly:
Machine is optimizing the drying
cycle according to the laundry type
and load size. It will vary for each
kind of fabric as the water
absorption is different.
This is a normal behavior
of the machine and not a
cause for concern as it
does not compromise its
performance.
Display time
is frozen at
the end of
drying cycle
for more than
30 minutes:
If you are unable to identify or solve the
problem, contact our service centre.
Before calling service centre, make a
note of the model, serial number and
purchase date of your machine: the
Service Centre will require this
information.
NOTE
Mod :
PNC :
S/N :
Scan QR code
Made in Thailand

Electrolux UltimateCare 700 Specifications

General

Capacity	8 kg
Reverse Tumbling	Yes
Sensor Drying	Yes
Delay Start	Yes
Child Lock	Yes
Noise Level	65 dBA
Programs	Cottons, Synthetics, Delicates, Refresh, Mixed
Dimensions	850 x 600 x 600 mm