APPENDIX
B
TOUCHMONITOR SAFETY
This manual contains information that is important for the proper setup and maintenance of the
touchmonitor. Before setting up and powering on the new touchmonitor, read through this manual,
especially Chapter 2 (Installation), and Chapter 3 (Operation).
1 To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor
case.
2 Turn off the product before cleaning.
3 The new touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug
will only fit into a grounded outlet. Do not attempt to fit the plug into an outlet that has not been
configured for this purpose. Do not use a damaged power cord. Use only the power cord that
comes with the touchmonitor. Use of an unauthorized power cord may invalidate the warranty.
4 The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block
or insert anything inside the ventilation slots.
5 It is important that the touchmonitor remains dry. Do not pour liquid into or onto the
touchmonitor. If the touchmonitor becomes wet do not attempt to repair it yourself. Conatct
your local dealer or Elo Technical Support for assistance.
B-27
To Next Page
Loading...
Need help?
General
