Emax TINYHAWK III User Manual

6.3 PID
PID profile 1 is tuned and optimized for Tinyhawk III and Emax 1S HV 450 mAH for proper
flight indoors and outdoors. Please do not change these values.
This configuration has been professionally adjusted by many parties, and EMAX strongly
recommends not to change these values arbitrarily.
6.4 Adjusting Software Settings (Betaflight Configurator)
Betaflight Configurator can be used to changed programmed settings on Tinyhawk III.
Betaflight Configurator and flight controller firmware can be downloaded at
https://github.com/betaflight/. The hardware target for Tinyhawk Flight Controller is
MatekF411RX
DISCLAIMER:
We do not suggest changing any PID settings on TinyhawkIII or upgrading the firmware
to new versions. Tinyhawk III comes stock with an optimal tune for superior flight
performance. Changing this can affect flight time, overall speed, control of the aircraft,
and excessive heat within the motors.

Emax TINYHAWK III Specifications

General

Brand	Emax
Model	TINYHAWK III
Category	Quadcopters
Language	English