Emerson LC320EM2F Service Manual

4-5 FL11.4-B_DC
[TYPE B]
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Assembly
D1 3(S-1) ---
[2]
Rear
Cabinet
D1
10(S-2), 3(S-3),
2(S-4), 13(L-1)
---
[3]
Digital Main
CBA Unit
D2
D3
4(S-5), CN3005,
CN3101, CN3102,
CN3701, CN3801,
CN3802, Jack Holder
---
[4]
Power
Supply
CBA
D2
D3
5(S-6), CN200,
CN601, CN1100,
CN1101, CN1102
---
[5]
Stand
Bracket
D2 (S-7) ---
[6] Speaker D2
4(S-8),
Speaker Holder
---
[7]
LCD
Module
Assembly
D2 --------------- ---
[8]
IR Sensor
CBA Unit
D2
D3
Sensor Lens ---
[1] Stand
Assembly
[2] Rear Cabinet
[4] Power Supply
CBA
[6] Speaker
[5] Stand Bracket
[3] Digital Main
CBA Unit
[9] Function
CBA Unit
[8] IR Sensor
CBA Unit
[7] LCD Module
Assembly
[10] Front
Cabinet
[9]
Function
CBA Unit
D2
D3
Function Knob ---
[10]
Front
Cabinet
D2 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note

Emerson LC320EM2F Specifications

General

Brand	Emerson
Model	LC320EM2F
Category	LCD TV
Language	English