To Next Page

To Previous Page

NITIAL SETTING

Note:

• If you connect the cable system directly, contact the CATV

installer.

• If you press [POWER] or [SETUP] during auto channel

scan, the setting will be canceled.

• Channel settings will be saved even if the power fails.

• If you need the English menus instead of the Spanish

or French menus you are having, press [SETUP]. Use

[Cursor K

/ L] to select “IDIOMA” or “LANGAGE”, then press

[ENTER]. Use [Cursor K / L] to select “English”, then press

[ENTER]. Press [SETUP] to exit the main menu.

• With regard only to the digital channel, even after the

scanning is complete if you unplug the AC power cord

before turning off the unit by pressing [POWER], the

channel setting may be lost.

Language Selection

You can choose English, Spanish, or French as your on-screen language.

Press [SETUP] to display the main menu.

Use [Cursor K

L] to select “LANGUAGE”, then press

[ENTER].

Use [Cursor K

L] to select “English”, “Español” or

“Français”, then press [ENTER].

Language

Select the language for setup display.

Elija el idioma de ajuste.

Sélectionner langue écran config.

Español

Français

English

Press [SETUP] to exit.

Emerson LC320EM82 User Manual

Other manuals for Emerson LC320EM82