8 Product certifications
8.1 Rosemount 2090
Rev 2.2
8.1.1 European Directive information
A copy of the EU Declaration of Conformity can be found at the end of this
guide. The most recent revision of the EU Declaration of Conformity can be
found at Emerson.com/Rosemount.
8.1.2 Ordinary certification location from CSA
The product has been examined and tested to determine that the design
meets the basic electrical, mechanical, and fire protection requirements by
CSA, a nationally recognized test laboratory (NRTL) as accredited by the
Federal Occupational Safety and Health Administration (OSHA).
8.1.3 North America
E5 USA Explosionproof (XP) and Dust-Ignitionproof (DIP)
Certificate:
1015441
Standards:
FM Class 3600 - 2011, FM, Class 3615 - 2006, FM class 3616 -
2011, FM Class 3810 - 2005, ANSI/NEMA 250 - 1991
Markings:
XP CL I, DIV 1, GP B, C, D; DIP CL II, DIV 1, GP E, F, G; CL III, DIV
1; T5(–40 °C ≤ T
a
≤ +85 °C); Conduit Seal Not Required; Type
4X
I5 USA Intrinsic Safety (IS) and Nonincendive (NI)
Certificate:
1015441
Standards:
FM Class 3600 - 2011, FM Class 3610 - 2010, FM Class 3611 -
2004, FM Class 3810 - 2005
Markings:
IS CL I, DIV 1, GP A, B, C, D; CL II, DIV 1, GP E, F, G; Class III
T4(–50 °C ≤ T
a
≤ +70 °C); when connected per Rosemount
drawing 02088-1024; NI CL 1, DIV 2, GP A, B, C, D; Type 4x
C6 Canada Explosionproof, Intrinsic Safety and Division 2, Dust-
Ignitionproof
Certificate:
1015441
Standards:
CAN/CSA C22.2 No. 0-M91 (R2001), CSA Std C22.2 No.
25-1966, CSA Std C22.2 No. 30-M1986, CAN/CSA-C22.2 No.
94-M91, CSA Std C22.2 No. 142-M1987, CAN/CSA-C22.2 No.
Quick Start Guide March 2022
24 Emerson.com/Rosemount
To Next Page
Loading...
Need help?
General
