1 System readiness
Confirm HART revision capability
• If using HART-based control or asset management systems, confirm the
HART capability of those systems prior to transmitter installation. Not all
systems are capable of communicating with HART Revision 7 Protocol.
This transmitter can be configured for either HART Revision 5 or 7.
• For instructions on how to change the HART revision of the transmitter,
see Switch HART Revision mode.
1.1 Confirm correct device driver
Verify the latest device driver (DD/DTM
™
) is loaded on your systems to
ensure proper communication.
Note
The Rosemount 2088, 2090F, and 2090P Transmitters all use Rosemount
2088 Device Revisions and Drivers.
Procedure
1. Download the latest DD at Emerson.com or FieldCommGroup.org.
2. In the Browse by Member dropdown menu, select Emerson.
3. Select desired product.
a) Reference Table 1-1 and Table 1-2, Find Device Driver Files
column to find the correct device driver.
Table 1-1: Rosemount 2088 and 2090 with 4–20 mA HART Device Revisions and
Files
Release
date
Device identification Device driver
identification
Review
instructions
Review
functionality
NAMUR
revision
(1)
HART revision
(2)
Device
revision
(3)
Reference
manual
Change
description
(4)
(5)
Hardware Software Universal
Aug-16 1.1.xx 1.0.xx 3 7 10 Rosemount
2088, 2090P
and 2090F
Reference
Manual
(5)
5 9
Jan-13 N/A 1.0.xx 1 7 10
(4)
5 9
Jan-98 N/A N/A 178 5 3 N/A
(1) NAMUR revision is located on the hardware tag of the device. Differences in level 3 changes,
signified above by xx, represent minor product changes as defined per NE53. Compatibility
and functionality are preserved and product can be used interchangeably.
March 2022 Quick Start Guide
Quick Start Guide 3
To Next Page
Loading...
Need help?
General
