1-1-2 T7300SP
<AUDIO>
All items are measured across 8Ω resistor at speaker output terminal.
Note: Nominal specifications represent the design specifications. All units should be able to approximate these.
Some will exceed and some may drop slightly below these specifications. Limit specifications represent the abso-
lute worst condition that still might be considered acceptable. In no case should a unit fail to meet limit specifica-
tions.
Description Condition Unit Nominal Limit
1. Audio Output Power (Max.) (R/P) W 1.0 0.8
2. Audio S/N (W/LPF) (R/P) dB 40 36
3. Audio Distortion (W/LPF) (R/P) % 3.0 5.0
4. Audio Freq. Response
(-10dB Ref. 1KHz)
200Hz (R/P)
8kHz (R/P)
dB
dB
-2.0
0
-2.0 ± 5.0
0 ± 6.0
To Next Page
Loading...
Need help?
General
