Sensi Touch 2 Smart Thermostat | INSTALLATION GUIDE 10
HVAC configuration menu
If you want to check that your thermostat’s HVAC
settings were configured correctly or you’re experiencing
a system issue, refer to the chart for equipment
descriptions and options. Learn more about how
to properly configure your thermostat here:
sensi.emerson.com/en-us/support/how-
do-i-configure-my-thermostat
Accessing your Sensi thermostat
from other devices
When you log into your Sensi account with your email
address and password, the app will be able to control
all the thermostats registered to your Sensi account.
If you give someone else your email address and the
password to your Sensi account, they will be able to log in and
control any thermostats registered to that account. You can
change your email address and password from inside the app.
Be aware of this when giving out your information. There is no
limit to the number of devices that can access the thermostat.
Forgot password
If you forget the password to your Sensi account,
click on Forgot Password on the login screen of
the Sensi app. A temporary password will be sent
to the email address that you use to log in.
CONFIGURATION MENU ITEMS REFERENCE
Menu item Description Options
Outdoor Equipment Select AC or Heat Pump
equipment, as well as
the number of stages.
Set this to AC1 for
single-stage systems or
HP1 or HP2 for single or
multi-stage heat pumps
AC1/AC2/HP1/
HP2/None
Indoor Equipment Select whether the
equipment is an electric
or gas furnace or fan
only. Set this to EL1 for
single- stage electric or
GA1 or GA2 for single or
multi-stage gas systems.
GA1/GA2/EL1/
EL2/Fan
Reversing Valve
Position
When configured for O,
the reversing valve is
energized in cooling.
This will cover most
applications. Some
manufacturers, such as
Rheem or Rhudd, use the
B terminal, which would
energize in heating. For
three-wire zone hydronic
systems, set this to Z.
O/B/6/None
Additional
Accessories
Humidifier
(wired to
thermostat)
If a humidifier is wired to
the thermostat, change the
Humidifier setting to YES.
Yes/No
Dehumidifier
(wired to
thermostat)
If a dehumidifier is
wired to the thermostat,
change the Dehumidifier
setting to YES.
Yes/No
NOTES
To Next Page
Loading...
Need help?
General
