EasyManuals Logo

Emerson White Rodgers 36H Series User Manual

Emerson White Rodgers 36H Series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
White-Rodgers is a business
of Emerson Electric Co.
The Emerson logo is a
trademark and service mark
of Emerson Electric Co.
www.white-rodgers.com
www.emersonclimate.com
A. HSI MODELS: This appliance does not have a
pilot. It is equipped with an ignition device which
automatically lights the burner. Do not try to
light the burner by hand.
PROVEN/INTERMITTENT PILOT MODELS:
This appliance is equipped with an intermittent
ignition device which automatically lights the
appliance. Do not try to light the pilot by hand.
B. BEFORE OPERATING smell all around the ap-
pliance area for gas. Be sure to smell next to the
oor because some gas is heavier than air and
will settle on the oor.
FOR YOUR SAFETY
“WHAT TO DO IF YOU SMELL GAS
• Donottrytolightanyappliance.
• Donottouchanyelectricalswitch;donotuse
any phone in your building.
• Immediatelycallyourgassupplierfroma
neighbor’sphone.Followthegassupplier’s
instructions.
• Ifyoucannotreachyourgassupplier,callthe
redepartment.
C. Use only your hand to move the gas control
switch. Never use tools. If the switch will not
move by hand, don’t try to repair it, call a quali-
ed service technician. Force or attempted repair
may result in a re or explosion.
D. Do not use this appliance if any part has been
under water. Immediately call a qualied service
technician
to inspect the appliance and to replace any part
of the control system and any gas control which
has been
under water.
Ifyoudonotfollowtheseinstructionsexactly,areorexplosion
may result, causing property damage, personal injury or loss of life.
FOR YOUR SAFETY READ BEFORE OPERATING
1. Set the thermostat to lowest setting.
2. Turn o all electric power to the appliance if service
is to be performed.
3. Remove control access panel.
4. Push gas control switch to “OFF.” Do not force.
5. Replace control access panel.
TO TURN OFF GAS TO APPLIANCE
1. STOP! Read the safety information above on this
label.
2. Set the thermostat to lowest setting.
3. Turn o all electric power to the appliance.
4. HSI MODELS: This appliance is equipped with
an ignition device which automatically lights the
burner. Do not try to light the burner by hand.
5. PROVEN/INTERMITTENT PILOT MODELS:
This appliance is equipped with an ignition device
which automatically lights the pilot. Do not try to
light the burner by hand.
6. Remove control access panel.
7. Wait ve (5) minutes to clear out any gas. If you
then smell gas, STOP! Follow “B” in the safety
information above on this label. If you don’t smell
gas, go to the next step.
8. Push gas control switch to “ON.”
NOTE: Do not force.
9. Replace control access panel.
10. Turn on all electric power to the appliance.
11. Set thermostat to desired setting.
12. If the appliance will not operate, follow the
instructions “To Turn O Gas To Appliance” and
call your service technician or gas supplier.
OPERATING INSTRUCTIONS
LIGHTING INSTRUCTIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Emerson White Rodgers 36H Series and is the answer not in the manual?

Emerson White Rodgers 36H Series Specifications

General IconGeneral
BrandEmerson
ModelWhite Rodgers 36H Series
CategoryControl Unit
LanguageEnglish

Related product manuals