2
Scope of delivery
Please check the contents of the packing box are complete before
starting with the installation and start-up procedure.
y 1 NXT4 device
y 1 Instructions for use
y Accessory (optional):
• Readout battery
• Path separator
If the contents are incomplete or damaged, please contact your supplier.
Store, use and transport the device in such a way that it is protected
against moisture, dirt and damage.
Important information
These instructions for use are part of the documentation. These
instructions list all the dierent device versions. Some of the features
described herein may not be applicable for your particular device.
More comprehensive information about the device is available
in the product manual. Please also observe all the documents
included with other components.
Target group
These instructions are intended for technicians who are responsible
for the installation, connection and servicing of the devices. The device
may only be installed and started up by qualied electricians in accord-
ance with the generally accepted technology standards and, where
applicable, the denitive regulations governing the erection of communi-
cation equipment and terminal devices.
Intended use
The meter is intended to be used solely for the measurement of electri-
cal energy, and it must not be operated outside the specied technical
data (see name plate).
To Next Page
Loading...
Need help?
General
