Endress+Hauser Liquicap M FTI51 User Manual

Liquicap M FTI51, FTI52 Installation
Endress+Hauser 39
3.7 Probe with active buildup compensation
L00-FMI5xxxx-03-05-xx-en-008
GN/YE
YE
RD
1. Pressing screw
2. Insert seal
3. Cabel gland
4. Heatshrinking sleeve
5. Seal
6. Adapter disk
7. Seal
8. Plug M3
9. Split washer
10. Strand yellow/green (YE/GN) with ring terminal
11. Strand yellow (YE) soldered with the guard strand,
insulated with a heatshrinking sleeve
12. Snap ring
13. Nut M4
14. Split washer
15. Strand red (RD) with ring terminal
insulated with a heatshringking sleeve
16. Blade plug
18. Tube
19. Process connection
21. Strand black (BK)
(not required)
23. Strand yellow/green (YE/GN)
with a ring terminal
25. Solder the strand
with the central core of the
coaxial cable (probe)
red (RD)
24. Solder the strand
with the strand (RD)
from the tube.
yellow (YE)
guard
20. External screening
(not required)
22. Coaxial cable with
nd
central core
a screening
17. Guard strand (rd)

Endress+Hauser Liquicap M FTI51 Specifications

General

Brand	Endress+Hauser
Model	Liquicap M FTI51
Category	Switch
Language	English