enphase IQ Combiner 5 - User Manual

June 10, 2023
How to make the IQ Combiner 5/5C
compatible with IQ Battery 3T/10T

enphase IQ Combiner 5 Specifications

General

Brand	enphase
Model	IQ Combiner 5
Category	Inverter
Language	English

Summary

IQ Combiner 55 C Compatibility with IQ Battery 3 T10 T Upgrade

Step 1: Unplug Mobile Connect

Disconnect the Mobile Connect from the USB port to enable deadfront removal.

Step 2: Unscrew Deadfront

Remove the four corner screws to detach the deadfront panel.

Step 3: Unplug Existing Communications Kit

Disconnect the pre-installed COMMS-KIT-02 from the circuit board.

Step 4: Install New Communications Kit

Connect COMMS-KIT-01 to the USB port, positioning it externally.

Step 5: Reinstall Deadfront Panel

Reattach the deadfront using screws, routing the new cable through the designated gap.

Step 6: Attach New Communications Kit

Secure the new Communications Kit to the deadfront using double-sided tape.

Step 7: Secure Cables with Zip Ties

Use zip ties to manage and secure the Communications Kit and Mobile Connect USB cables.