QUICK INSTALL GUIDE - EN
Installing Enphase IQ Energy Router+
The IQ Energy Router+ includes the Enphase IQ Energy Router, Energy Meter, and SG Ready Relay. The IQ Energy Router integrates Enphase solar and storage battery
systems with heat pumps and EV chargers and other devices to maximize self-consumption and minimize costs for the overall site. Installers should use the Enphase
Installer App and the Enphase Installer Portal to install and maintain the system. System owners can use the Enphase App to monitor energy and control the system.
The IQ Energy Router, Energy Meter, and SG Ready Relay are connected to the home router either directly or via an Ethernet switch.
To install the IQ Energy Router, Energy Meter, and SG Ready Relay, read and follow all warnings and instructions in this guide. Safety warnings are listed at the end of
this guide. If you do not fully understand any of the concepts, terminology, or hazards outlined in these instructions, refer installation to a qualied electrician or installer.
All installations must comply with national and local electrical codes. Professional installation is recommended.
(Model: HEMS-HP-01)
Ethernet or Wi-Fi
Internet Router
SINGLE LINE DIAGRAM
What’s in the box
The box contains the IQ Energy Router, CAT 6 Ethernet cable with RJ45
jack at either end, DC power supply cable, TQ EM420 Energy Meter, and
SG Ready Relay.
IQ Energy Router
CAT 6 Ethernet cable DC power supply cable
To Next Page
Need help?
General