User Reference Guide 19
User Reference Guide
Clean the Printhead
Clean the printhead in the following situaons:
• There are unprinted lines on the nished card. This usually indicates
dirt or contaminants on the printhead.
• The printhead is touched accidentally. Oils from hands can aect
print quality and damage the printhead.
• A ribbon break caused part of the ribbon to sck to the printhead or
printhead cover.
• The printhead has been replaced.
1. Power o the printer.
2. Unlock the printer and open the printer cover.
3. Open and remove a cleaning swab from its package.
4. Li the printhead protecve cover. Use the sides of the cover to
rotate it away from the printhead.
5. Use gentle pressure to move the cleaning swab back and forth along
the full length of the printhead edge unl it is completely clean.
6. Close the printer cover.
7. Power on the printer.
8. Print a sample card to verify the quality of prinng.
To Next Page
Loading...
Need help?
General
