Safety and operating instructions
10 © Construction Tools PC AB | 9800 1594 01 | 2020-03-23
Original Instructions
WARNING Hot working tool
The tip of the working tool gets very hot during opera-
tion. Touching it may lead to burns.
u Never touch the hot working tool.
u If you have to carry out any activities, wait for the
working tool to cool down first.
WARNING Working tool hazards
Accidental engagement of the start and stop device dur-
ing maintenance or installation can cause serious in-
juries, when the power source is connected.
u Never inspect, clean, install, or remove the working
tool while the power source is connected.
2.7 Storage, precautions
WARNING Heavy hydraulic breaker and working
tool
The hydraulic breaker and the working tool are heavy
equipment. If the breaker or working tool topple over or
fall down from where they are stored, it can result in ma-
terial damage and personal injury.
u Store the hydraulic breaker and the working tool so
that falling or rolling down is prevented.
To Next Page
Loading...
Need help?
General
