Safety and operating instructions
18 © Construction Tools PC AB | 9800 1594 01 | 2020-03-23
Original Instructions
n
The hydraulic breaker or the working tool is not to be
used as a lifting device. When lifting heavy compo-
nents use the hook on the carrier arm.
n
Never use the hydraulic breaker as a sledge hammer
to demolish material.
n
Never use the hydraulic breaker to move debris.
6.2.3 Use under water
n
Never use the hydraulic attachment under water.
This would seriously damage the hydraulic attach-
ment and may damage the whole hydraulic installa-
tion.
6.2.4 Special applications
NOTICE Always consult the Customer Center /Dealer in
your area in case of special applications- tunnelling, high
thermal load and underwater application.
You can contact your nearest authorised workshop for
further instructions.
7 Maintenance
It is essential that regular maintenance is performed to
maintain the breakers maximum efficiency.
Equipment that is insufficiently maintained can be dan-
gerous for both the operator and persons near the
breaker. Make sure that regular maintenance routines
with lubrication are followed to keep the equipment safe
and efficient.
To Next Page
Loading...
Need help?
General
