Safety and operating instructions
22 © Construction Tools PC AB | 9800 1594 01 | 2020-03-23
Original Instructions
8 Storage
WARNING Heavy hydraulic breaker and working
tool
The hydraulic breaker and the working tool are heavy
equipment. If the breaker or working tool topple over or
fall down from where they are stored, it can result in ma-
terial damage and personal injury.
u Store the hydraulic breaker and the working tool so
that falling or rolling down is prevented.
The hydraulic breaker must be stored in an upright posi-
tion to avoid its seals being damaged. If the hydraulic
breaker is not used for a long time, the following points
have to be considered to protect the hydraulic breaker
from corrosion:
1.
Remove the hydraulic breaker from the carrier.
2.
Clean the hydraulic breaker carefully (see chapter
Cleaning).
3.
Dismount the working tool (see chapter Mounting and
dismounting the working tool).
4.
Lubricate the front part of the piston, wear bushing,
and the retainer bars.
5.
Store the hydraulic breaker in a dry place.
Always keep the breaker in an upright position, if stored
for a long time and so that it cannot topple over.
9 Disposal
A used machine must be treated and scrapped in such a
way that the greatest possible portion of the material can
be recycled and any negative influence on the environ-
ment is kept as low as possible.
Before a used machine is scrapped it must be emptied
and cleaned from all hydraulic oil. The remaining hy-
draulic oil must be deposited and any negative influence
on the environment is to be kept as low as possible.
To Next Page
Loading...
Need help?
General
