EPOS T-12 User Manual

17
6. Specifications
Important!
When connecting or disconnecting the power supply from the printer, be sure that the following
cautions are observed.
Use a power supply (Limited Power Supply) of DC 24V±10% and more than 2.5A.
Be careful about installing the printer in an area where there is electrical noise.
Take the appropriate measure to protect against electrostatic AC line noise, etc.
6-1. General Specifications
(1) Printing Method Direct line thermal printing.
(2) Print speed 160mm/sec.
(3) Dot density
180 DPI (Hor / Ver) 180 / 180 (0.142mm / 0.142mm dot)
(4) Printing Width
180 DPI Max 72mm (512 dots)
(5) Dot Pitch 0.141mm X 0.141mm
(6) Number of print columns.
No. of columns
Font “A” Font “B”
180 DPI 42 56
(7) Paper Roll Refer to chapter 2 for details on loading the Paper.
Paper width: 82.5mm
Roll diameter: Max. ø83.0mm
(8) Weight 1.7Kg
www.eposcom.ru

EPOS T-12 Specifications

General

Brand	EPOS
Model	T-12
Category	Printer
Language	English