Submenu Function
Projector Info
• Lamp Hours: Displays the cumulative lamp operating
time
*
. When it reaches the lamp warning time, the
characters are displayed in yellow.
• Source: Displays the source name for the connected
equipment currently being projected.
• Input Signal: Displays the setting for Input Signal in the
Signal menu according to the source.
• Resolution: Displays the resolution.
• Video Signal: Displays the settings for Video Signal in
the Signal menu.
• Refresh Rate: Displays the
refresh rate
g
.
• Sync Info: Displays the image signal information.
This information may be needed if service is required.
• Status: Displays the information about errors that have
occurred in the projector. This information may be
needed if service is required.
• Serial Number: Displays the projector's serial number.
• Event ID: Displays the problems occurred in the projector
using the Event IDs, when the projector and the
computer are connected through the network. See the
following page for the detailed information on the Event
ID.
s "About Event ID" p.97
Version
Displays the projector's software version information.
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours
and above is displayed as "10H", "11H", and so on.
Reset Menu
Submenu Function
Reset All
You can reset all items in the Configuration menu to their default
settings.
The following items are not reset to their defaults: Input Signal,
User's Logo, Lamp Hours, Language, Password, Zoom (EB-
S29/EB-S27 only), and all items on the Network menu.
Reset Lamp
Hours
Clears the cumulative lamp hours use time. Reset when you
replace the lamp.
List of Functions
119
To Next Page
Loading...
Need help?
General
