EasyManuals Logo
Home>Epson>Projector>EX3220

Epson EX3220 User Manual

Epson EX3220
207 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
lens. Do not spray any liquid directly on the lens.
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector lamp may cause a fire.
Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens
to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid
touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.
Parent topic: Projector Maintenance
Cleaning the Projector Case
Before cleaning the projector case, turn off the projector and unplug the power cord.
To remove dust or dirt, use a soft, dry, lint-free cloth.
To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid
directly on the projector.
Caution: Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the projector
case. These can damage the case. Do not use canned air, or the gases may leave a residue.
Parent topic: Projector Maintenance
Air Filter and Vent Maintenance
Regular filter maintenance is important to maintaining your projector. Your Epson projector is designed
with an easily accessible, user-replaceable filter to protect your projector and make regular maintenance
simple. Filter maintenance intervals will depend on the environment.
If regular maintenance is not performed, your Epson projector will notify you when the temperature
inside the projector has reached a high level. Do not wait until this warning appears to maintain your
projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
Damage due to the failure to properly maintain the projector or its filter may not be covered by the
projector or lamp Limited Warranties.
Cleaning the Air Filter and Vents
Replacing the Air Filter
Parent topic: Projector Maintenance
117

Table of Contents

Other manuals for Epson EX3220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EX3220 and is the answer not in the manual?

Epson EX3220 Specifications

General IconGeneral
Matrix type3-panel (p-Si TFT active)
Number of colors1.073 billion colors
Native aspect ratio4:3
Projection distance0.88 - 10.44 m
Projection technology3LCD
Supported aspect ratios-
Contrast ratio (typical)10000:1
Screen size compatibility- \
Projector native resolutionSVGA (800x600)
Keystone correction, horizontal30 °
FocusManual
Throw ratio1.45 - 1.96:1
Focal length range0 - 16.7 mm
Lamp typeUHE
Lamp power200 W
Light source typeLamp
Service life of light source5000 h
Service life of light source (economic mode)6000 h
Full HDNo
Analog signal format systemNTSC, PAL
Supported graphics resolutions640 x 480 (VGA), 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+)
AC (power) inYes
USB connector typeUSB Type-A, USB Type-B
HDMI connector typeFull-size
USB 2.0 ports quantity2
Component video (YPbPr/YCbCr) in0
Noise level37 dB
Noise level (economic mode)29 dB
RMS rated power2 W
PlacementDesktop, Tripod
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)- W
Power consumption (typical)283 W
Power consumption (economy mode)207 W
Sustainability certificatesRoHS
Cables includedAC, USB, VGA
Remote control typeIR
Operating temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Depth228.6 mm
Width294.6 mm
Height78.74 mm
Weight2400 g

Related product manuals