Important Safety Instructions
Read all of these instructions before using the printer. Also be sure to follow all warnings and instructions marked on
the printer.
The symbols on the product
The symbols on this Epson product are used in order to ensure safety and proper use of the product and to prevent
danger to customers and other persons, and property damage.
The symbols indicate the meaning below. Be sure that you completely understand the meaning of symbols on this
product before using it.
Stand-by Alternating Current
Notes on Installing
Warning
Do not obstruct the vents on the product.
If the vents are obstructed, the internal temperature could rise and cause a fire. Do not cover the printer with a cloth or install it in a
location with poor ventilation. Make sure you secure sufficient space for the installation as described in the manual.
U Setup Guide(booklet)
Caution
Do not install or store the printer in an unstable location or a location subject to vibrations from other
equipment.
The printer could fall or tip over and cause an injury.
Do not install the printer in locations subject to oily smoke and dust, or in locations subject to humidity or
where it could easily get wet.
An electric shock or fire could occur.
Do not tilt the product more than 10 degrees forward, back, left, or right while moving it.
Failure to observe this precaution could result in the printer falling over, causing accidents.
Because the product is heavy, it should not be carried by one person.
Four people are needed to unpack or carry the printer. See the following for details on the product's weight.
U “Specifications Table” on page 17
SC-P9500 Series / SC-P7500 Series General Information
Important Safety Instructions
7
To Next Page
Loading...
Need help?
General