Epson TM-U295 User Manual

TM-U295/TM-U295P User’s Manual 7
English
4. Open the printer cover by first
pressing the ridges on the top
to the left slightly and then
pulling the cover forward, as
shown in illustration
2.
5. If there is a used ribbon,
remove it by grasping the
handle and pull it straight out,
as shown by the arrow in
illustration
3.
6. Before installing the new
ribbon, check that it is not creased or twisted. Then turn the feed knob
in the direction of the arrow on the ribbon cassette to take up any
slack in the ribbon.
7. Carefully insert the ribbon
cassette in the printer as shown
in illustration
4. Notice exactly
where the ribbon must go.
8. Push firmly on the right side
and then the left side of the
ribbon cartridge until each side
clicks into place.
9. To put the cover back on the
printer, first align the left side
of the cover; then insert the tab on the top; then press the bottom until
it clicks into place (see illustration
2).
Inserting Paper
Note:
Do not use wrinkled or curled paper. Be sure to use roll paper that meets the
specifications.
1. Make sure a ribbon cassette is installed in the printer.
2. Turn on the printer. The POWER light comes on.
3. Press the RELEASE button. The RELEASE light comes on to show that
the printer is in release mode. In this mode, paper can be inserted and
removed.
2
3
4

Epson TM-U295 Specifications

General

Color	No
Maximum number of copies	2 copies
Maximum printing width (columns)	42
Dimensions (WxDxH)	180 x 190.5 x 101.5 mm
Power requirements	24 VDC±10%
Connectivity technology	Wired
Printing media thickness	0.09/0.35 µm
Mean time between failures (MTBF)	180000 h
Safety	UL, CSA C22.2 No. 950
Country of origin	Japan
Electromagnetic compatibility	VCCI class A, FCC class A, CE marking
Pallet width	1200 mm
Pallet height	1000 mm
Pallet length (UK)	1370 mm
Quantity per pallet	120 pc(s)
Quantity per pallet (UK)	160 pc(s)
Master (outer) case width	300 mm
Quantity per pallet layer	24 pc(s)
Master (outer) case height	405 mm
Master (outer) case length	485 mm
Harmonized System (HS) code	84433210
Quantity per pallet layer (UK)	32 pc(s)
Quantity per master (outer) case	4 pc(s)
Package depth	270 mm
Package width	235 mm
Package height	185 mm
Package weight	1845 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Depth	191 mm
Width	180 mm
Height	102 mm
Weight	1600 g