Epson VS400 User Manual

1. Hold down the Num button on the remote control while you enter the password using the numeric
buttons.
The password screen closes.
2. If the password is incorrect, the following may happen:
• You see a "wrong password" message and a prompt to try again. Enter the correct password to
proceed.
• If the password is incorrect three times, you see a message that the projector is locked and a
request code. Write down the code, then disconnect the power cord from the projector, reconnect
it, turn the projector back on, and enter the password again.
• If the password is incorrect 30 times in a row, the projector remains locked. You must contact
Epson for service and provide the request code displayed with the locking message.
Parent topic: Password Security Types
Related references
Where to Get Help
Saving a User's Logo Image to Display
You can transfer an image to the projector and then display it whenever the projector turns on. You can
also display the image when the projector is not receiving an input signal or when you temporarily stop
projection (using the A/V Mute button). This transferred image is called the User's Logo screen.
The image you select as the User's Logo can be a photo, graphic, or company logo, which is useful in
identifying the projector's owner to help deter theft. You can prevent changes to the User's Logo by
setting up password protection for it.
58

Epson VS400 Specifications

General

Number of colors	16.78 million colors
Projection distance	0.76 - 7.62 m
Projection technology	LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	30 - 300 \
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	±30 °
Mounting	front / rear
Aspect ratio	16:10
RS-232 ports	1
Dimensions (WxDxH)	358 x 257 x 95 mm
Horizontal resolution	560 lines
Lamp type	UHE
Lamp power	230 W
Light source type	Lamp
Service life of light source	2500 h
Service life of light source (economic mode)	3500 h
DVI port	No
Audio (L/R) in	-
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	0
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions	1024 x 768 (XGA), 1152 x 864 (XGA+), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA)
Placement	Ceiling
Product color	White
Cable lock slot type	Kensington
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	317 W
Noise level	37 dB
Noise level (economic mode)	29 dB
Operating temperature (T-T)	5 - 35 °C

Weight and Dimensions

Weight	3550 g