2 INTRODUCTION
0460 446 301
- 7 -
© ESAB AB 2019
2 INTRODUCTION
Arc 151i, Arc 201i is a welding current power source intended for use with coated electrodes
(MMA welding) and TIG welding.
ESAB accessories for the product can be found in the "ACCESSORIES" chapter of this
manual.
2.1 Equipment
Arc 151i, Arc 201i is supplied with a 3 m welding cable, return cable, 3 m mains cable and an
instruction manual for power source and control panel.
Instruction manuals in other languages can be downloaded from the website,
www.esab.com.
2.2 Control panel
Control panel A31
• Knob for setting the current
• Mains voltage LED (green)
• Thermal overload trip indicator (yellow)
Control panel A33
Welding process parameters are controlled via the control panel.
NOTE!
See the separate instruction manual for a detailed description of the control panel.
To Next Page
Loading...
Need help?
General
