7
Note: The fridge can be operated between 10.3V and 17.5V DC or 22V and 26V DC.
If the voltage is out of range, the fridge will not work. Over voltage could cause
damage to the electronic components of the fridge.
Operation from main power
When using the fridge indoors from mains, please use the AC/DC adapter (optional item).
7. Temperature Settings
• Press the power switch to switch fridge on or o.
• Press the ‘up’ button or ‘down’ button to adjust the temperature.
• Press the ‘up’ button once to adjust the temperature by +1°C.
• Press the ‘down’ button once to adjust the temperature by -1°C.
• Maximum cool setting is -19C.
Attention: Only qualified technicians may modify the fridge with approval of the
manufacturer.
8. Tips for Energy Saving
• Place the fridge in a cool and dry place away form direct sunlight.
• Always cool the food or drink before storing them into the fridge.
• Do not set the temperature colder than you require.
• Do not open the fridge more than necessary.
• Do not leave the lid open longer than necessary.
9. Storage
When storing your fridge it is recommended to leave the lid slightly open. This will prevent
mould form forming, and will keep stale odours out of your fridge. It is also recommended
to follow our cleaning procedures prior to storing your cooler.
10. Cleaning
Your fridge does not need to be cleaned before initial use.
1. Clean your fridge with a so cloth moistened with lukewarm water.
2. Pay attention that no water drops into the vents, as this may lead to damage to the
electronic components.
3. Us a so dry cloth to completely dry the fridge aer cleaning.
4. Clean the fridge aer use and before storage.
Attention: Never use solvents or abrasive cleaners, as this will damage the fridge.
Do not use scourers or scrapers to clean your fridge.
To Next Page
Loading...
Need help?
General
