While fasten the wheel nuts , one should always keep fasten it
on in cross-sequence .To attach the perfect tight situation.
Worn, improperly inflated, improper sized, or incorrectly installed tires will affect vehicle handling
and could cause an accident resulting in server injury or death.
Check the lug nuts for tightness at the intervals that the manufacturer requests, EVOLUTION advises the
end user check the lug nuts of tire for tightness or missing daily for safety inspection.
1. Clean both tire beads to remove dirt or other object.
2. Where the tire beads seat,clean the wheel rim with a wire brush
3. Apply plenty of tire mounting lubricant(soap and solution)to both beads and
rim flanges
4. Install the tire on the rim from the valve stem side .if thre is no tire machine
available ,use a rubber mallet and tire iron
5. Remove the valve core and position tire so that both beads are on the rim
flange narrow bead seats
6. Quickly remove the air nozzle and install the valve core
7. Adjust the tire ,keep the air pressure between 3.5-4.0MP,immerse the tire into
water to make sure there are no leaks
To Next Page
Loading...
Need help?
General
