1 2
3
10
English
20 EN
15. Beverage dispensing - Steam
Completely immerse the steam
dispensing wand (10) in the
container with the beverage to be
heated.
Scalding hazard! Use the appropriate insulating devices to
move the steam nozzle.
Press a steam dispensing icon
.
The dispensing nozzle (10) will operate for the programmed time; it
will stop automatically
(*)
.
Note: dispensing can be interrupted by pressing the
key.
Pressing the
key does not change the programmed parameters.
(*)
In the case of manual steam, the user must stop dispensing.
Cleaning the steam wand
After each use:
- wash the outside with hot water and a clean sponge,
removing any organic residue; rinse thoroughly.
- clean the inside of the wand as follows: turn the nozzle
towards the cup tray and carefully activate steam dispensing
at least once.
02_QUICK_UNICO_1815_USA_en_fr.indd 20 11/04/2018 11:24:48
To Next Page
Loading...
Need help?
General
