Press to return to the initial configuration screen, or press to return to the
initial configuration screen and confirm the changes.
1.4 Units of measure
On the initial configuration screen, select the icon , and go to the units of measure menu to
select the required unit of measure.
- Temperature: Press to display the temperature in ºC, and for ºF.
- Weight: Press to display the weight in kg, and for lb.
- Size: Press to display the size in mm, and for inches.
Press to return to the initial configuration screen, or press to return to the
initial configuration screen and confirm the changes.
1.5 Beep
Pressing the key activates the option that allows you to activate/deactivate the buzzer. By
default, enabled.
1.6 Thermal stop
On the initial configuration screen select the icon , and go to the thermal stop activation /
deactivation menu.
If this is disabled, the thermal stop does not take place even if this parameter is active in the
currently running cycle.
To Next Page
Loading...
Need help?
General
